Redetermination of (6R,7S,9S,11S)‐(–)‐sparteinium monoperchlorate

The structure of the title compound, C₁₅H₂₇N₂⁺·ClO₄^?, consists of a monoprotonated sparteinium cation and a perchlorate anion. The two tertiary N atoms of the cation, one perchlorate O atom and a H atom form a bifurcated hydrogen bond, the four hydrogen‐bonding atoms being nearly in the same plane.     

Electrochemical and Electrochromic Properties of Ni Oxide Thin Films Prepared by a Sol–Gel Method

Nickel oxide thin films, which are well known anodic coloration materials that are used in electrochromic devices, were prepared by a sol–gel method, and their electrochemical and electrochromic properties were investigated. The sol was prepared from Ni(OH)₂ powder with an average size of 7 nm, in a mixture of ethylene glycol and absolute ethanol. The films were coated on an ITO substrate using the powder, dispersed in the solution. When additive materials, acetyl acetone and glycerol, were added to the sol its hardness and adhesion properties were improved. The optimized thin film formed an amorphous, porous structure, and showed a large current density during continuous potential and pulse potential cycling. The film also was transparent and had a high coloration efficiency (33.5 cm²/C) and a rapid response time (1.0–2.5 s) during the coloring/bleaching process.     

A new and convenient synthesis of N-substituted perhydroazepines from adipaldehyde and primary amines with tetracarbonylhydridoferrate,HFe(CO), as a selective reducing agent

Ethanolic tetracarbonylhydridoferrate combined with adipaldehyde is very efficient for the selective transformation of an amino group into perhydroazepine. A large variety of both aliphatic and aromatic amines react with adipaldehyde in the presence of tetracarbonylhydridoferrate at room temperature and carbon monoxide to give the corresponding N-alkyl- and N-arylperhydroazepines in good to excellent yields.     

A ruthenium-catalyzed one-pot method for α-alkylation of ketones with aldehydes

Ketones react with an array of aldehydes in dioxane at 80 °C in the presence of a catalytic amount of RuCl₂(PPh₃)₃ along with KOH to give the corresponding α-alkylated ketones in moderate to good yields. A reaction pathway involving base-catalyzed cross-aldol reaction between ketones and aldehydes to form α,β-unsaturated ketones and regioselective reduction of carbon-carbon double bond of α,β-unsaturated ketones is proposed for this catalytic process.     

Xanthine Sensors Based on Anodic and Cathodic Detection of Enzymatically Generated Hydrogen Peroxide

A xanthine biosensor was fabricated by the covalent immobilization of xanthine oxidase (XO) onto a functionalized conducting polymer (Poly‐5, 2′: 5′, 2″‐terthiophine‐3‐carboxylic acid), poly‐TTCA through the formation of amide bond between carboxylic acid groups of poly‐TTCA and amine groups of enzyme. The immobilization of XO onto the conducting polymer (XO/poly‐TTCA) was characterized using cyclic voltammetry, quartz crystal microbalance (QCM), and X‐ray photoelectron spectroscopy (XPS) techniques. The direct electron transfer of the immobilized XO at poly‐TTCA was found to be quasireversible and the electron transfer rate constant was determined to be 0.73 s^?1. The biosensor efficiently detected xanthine through oxidation at +0.35 V and reduction at ?0.25 V (versus Ag/AgCl) of enzymatically generated hydrogen peroxide. Various experimental parameters, such as pH, temperature, and applied potential were optimized. The linear dynamic ranges of anodic and cathodic detections of xanthine were between 5.0×10^?6?1.0×10^?4 M and 5.0×10^?7 to 1.0×10^?4 M, respectively. The detection limits were determined to be of 1.0×10^?6 M and 9.0×10^?8 M with anodic and cathodic processes, respectively. The applicability of the biosensor was tested by detecting xanthine in blood serum and urine real samples.     

Comparative study of three immunoassays based on monoclonal antibodies for detection of the pesticide parathion-methyl in real samples

Three immunoassay systems: indirect, direct competitive enzyme-linked immunosorbent assay (IC-ELISA and DC-ELISA), fluorescence polarization immunoassay (FPIA) based on monoclonal antibodies for the detection of parathion-methyl (PM) were developed and optimized. Several PM derivatives (haptens) were conjugated to proteins and fluoresceinthiocarbamyl ethylenediamine (EDF) to obtain immunogens and competitors. The influence of immunogen and competitor structures on the assay performance was investigated. IC-ELISA was the most sensitive of all techniques developed, with a detection limit of 0.08 ng ml⁻¹, but assay time was the longest (3.5 h per 96-well microtitre plate). DC-ELISA was easier to perform and quicker (1.5 h per 96-well microtitre plate) but less sensitive than IC-ELISA (detection limit was 0.5 ng ml⁻¹). FPIA was the fastest and simplest (7 min per 10 samples) but the least sensitive (detection limit was 15 ng ml⁻¹) technique. The methods were characterized by high specificity and reproducibility. The cross-reactivity for parathion-ethyl was around 30-40% for IC-ELISA and FPIA, but significantly higher (125%) for DC-ELISA. The immunoassays were applied to the analysis of PM residues in different food and environmental matrices. Methanol extracts of vegetable, fruit and soil samples were used for the analysis. Recoveries for most spiked samples averaged between 85 and 110%. The methods developed can be used for screening of food and environmental samples for PM residues without complicated clean-up.     

PHOTOCYCLOADDITION OF 5,7-DIMETHOXYCOUMARIN TO THYMINE

Abstract— C₄-_-Photocycloaddition of 5,7-dimethoxycoumarin (DMC) to thymine (λ≥ 300 nm) was studied in dioxane-water solution, in aqueous frozen state, and solid film state. The major product was isolated and characterized by physical methods. Elemental analysis data, spectral analyses, and photo-splitting of the product indicate the product to be a 1:l C₄-_-cycloadduct of DMC and thymine.     

PHOTOCYCLOADDITION REACTION OF 5,7-DIMETHOXYCOUMARIN TO THYMIDINE

Abstract— The photocycloaddition reaction of 5,7-dimethoxycoumarin to thymidine on direct irradiation (λ > 300 nm) is studied as a model for photosensitization reaction of furocoumarins. The major photoadducts were isolated by silica gel column and gel permeation chromatography. Each component of the photoadducts was further separated by reverse phase, paired-ion high performance liquid chromatography. The structure of these photoproducts isolated is consistent with 1:1 C₄-cycloadducts in accordance with characteristics of their UV, IR, NMR and mass spectra and elemental analysis data. The stereochemistry of each isomer was studied by Fourier transform NMR, UV and IR spectra. The fraction C has the anti head-to-tail configuration and the fraction D has the configuration of anti head-to-head. The fractions A and B probably have the syn configuration.     

Pt‐Nanoparticle Incorporated Carbon Paste Electrode for the Determination of Cu(II) Ion by Anodic Stripping Voltammetry

Pt‐nanoparticles were synthesized and introduced into a carbon paste electrode (CPE), and the resulting modified electrode was applied to the anodic stripping voltammetry of copper(II) ions. The synthesized Pt‐nanoparticles were characterized by cyclic voltammetry, scanning electron microscopy and X‐ray photoelectron spectroscopy techniques to confirm the purity and the size of the prepared Pt‐nanoparticles (ca. 20 nm). This incorporated material seems to act as catalysts with preconcentration sites for copper(II) species that enhances the sensitivity of Cu(II) ions to Cu(I) species at a deposition potential of ?0.6 V in an aqueous solution. The experimental conditions, such as, the electrode composition, pH of the solution, pre‐concentration time, were optimized for the determination of Cu(II) ion using as‐prepared electrode. The sensitivity changes on the different binder materials and the presence of surfactants in the test solution. The interference effect of the coexisted metals were also investigated. In the presence of surfactants, especially TritonX‐100, the Cu(II) detection limit was lowered to 3.9×10^?9 M. However, the Pt‐nanoparticle modified CPE begins to degrade when the period of deposition exceeds to 10 min. Linear response for copper(II) was found in the concentration range between 3.9×10^?8 M and 1.6×10^?6 M, with an estimated detection limit of 1.6×10^?8 M (1.0 ppb) and relative standard deviation was 4.2% (n=5).